Skip to content

Example: dynamic bmp peer

Alt text

r1

hostname r1
vrf def v1
 rd 1:1
 exit
proxy-profile p1
 vrf v1
 exit
int lo0
 vrf for v1
 ipv4 addr 2.2.2.1 255.255.255.255
 ipv6 addr 4321::1 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.1 255.255.255.252
 ipv6 addr 1234:1::1 ffff:ffff::
 exit
router bgp4 2
 vrf v1
 no safe-ebgp
 address uni
 local-as 1
 router-id 4.4.4.1
 temp t remote-as 2
 temp t shut
 exit
router bgp6 2
 vrf v1
 no safe-ebgp
 address uni
 local-as 1
 router-id 6.6.6.1
 temp t remote-as 2
 temp t shut
 exit
access-list test
 permit all any all any all
 exit
server bmp bmp1
 dynei test rx bgp4 2 t
 port 17971
 vrf v1
 exit
server bmp bmp2
 dynei test rx bgp6 2 t
 port 17972
 vrf v1
 exit
router bgp4 1
 vrf v1
 no safe-ebgp
 address uni
 local-as 1
 router-id 4.4.4.1
 monitor bmp p1 1.1.1.1 17971
 neigh 1.1.1.2 remote-as 2
 neigh 1.1.1.2 distan 255
 neigh 1.1.1.2 monitor bmp
 red conn
 exit
router bgp6 1
 vrf v1
 no safe-ebgp
 address uni
 local-as 1
 router-id 6.6.6.1
 monitor bmp p1 1.1.1.1 17972
 neigh 1234:1::2 remote-as 2
 neigh 1234:1::2 distan 255
 neigh 1234:1::2 monitor bmp
 red conn
 exit

r2

hostname r2
vrf def v1
 rd 1:1
 exit
int lo0
 vrf for v1
 ipv4 addr 2.2.2.2 255.255.255.255
 ipv6 addr 4321::2 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.2 255.255.255.252
 ipv6 addr 1234:1::2 ffff:ffff::
 exit
int eth2
 vrf for v1
 ipv4 addr 1.1.1.5 255.255.255.252
 ipv6 addr 1234:2::1 ffff:ffff::
 exit
router bgp4 1
 vrf v1
 no safe-ebgp
 address uni
 local-as 2
 router-id 4.4.4.2
 neigh 1.1.1.1 remote-as 1
 neigh 1.1.1.6 remote-as 3
 red conn
 exit
router bgp6 1
 vrf v1
 no safe-ebgp
 address uni
 local-as 2
 router-id 6.6.6.2
 neigh 1234:1::1 remote-as 1
 neigh 1234:2::2 remote-as 3
 red conn
 exit

r3

hostname r3
vrf def v1
 rd 1:1
 exit
int lo0
 vrf for v1
 ipv4 addr 2.2.2.3 255.255.255.255
 ipv6 addr 4321::3 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.6 255.255.255.252
 ipv6 addr 1234:2::2 ffff:ffff::
 exit
int eth2
 vrf for v1
 ipv4 addr 1.1.1.9 255.255.255.252
 ipv6 addr 1234:3::1 ffff:ffff::
 exit
router bgp4 1
 vrf v1
 no safe-ebgp
 address uni
 local-as 3
 router-id 4.4.4.3
 neigh 1.1.1.5 remote-as 2
 neigh 1.1.1.10 remote-as 4
 red conn
 exit
router bgp6 1
 vrf v1
 no safe-ebgp
 address uni
 local-as 3
 router-id 6.6.6.3
 neigh 1234:2::1 remote-as 2
 neigh 1234:3::2 remote-as 4
 red conn
 exit

r4

hostname r4
vrf def v1
 rd 1:1
 exit
int lo0
 vrf for v1
 ipv4 addr 2.2.2.4 255.255.255.255
 ipv6 addr 4321::4 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.10 255.255.255.252
 ipv6 addr 1234:3::2 ffff:ffff::
 exit
router bgp4 1
 vrf v1
 no safe-ebgp
 address uni
 local-as 4
 router-id 4.4.4.4
 neigh 1.1.1.9 remote-as 3
 red conn
 exit
router bgp6 1
 vrf v1
 no safe-ebgp
 address uni
 local-as 4
 router-id 6.6.6.4
 neigh 1234:3::1 remote-as 3
 red conn
 exit

r1 tping 100 60 2.2.2.2 vrf v1
r1 tping 100 60 4321::2 vrf v1
r1 tping 100 60 2.2.2.3 vrf v1
r1 tping 100 60 4321::3 vrf v1
r1 tping 100 60 2.2.2.4 vrf v1
r1 tping 100 60 4321::4 vrf v1
r2 tping 100 60 2.2.2.1 vrf v1
r2 tping 100 60 4321::1 vrf v1
r2 tping 100 60 2.2.2.3 vrf v1
r2 tping 100 60 4321::3 vrf v1
r2 tping 100 60 2.2.2.4 vrf v1
r2 tping 100 60 4321::4 vrf v1
r3 tping 100 60 2.2.2.1 vrf v1
r3 tping 100 60 4321::1 vrf v1
r3 tping 100 60 2.2.2.2 vrf v1
r3 tping 100 60 4321::2 vrf v1
r3 tping 100 60 2.2.2.4 vrf v1
r3 tping 100 60 4321::4 vrf v1
r4 tping 100 60 2.2.2.1 vrf v1
r4 tping 100 60 4321::1 vrf v1
r4 tping 100 60 2.2.2.2 vrf v1
r4 tping 100 60 4321::2 vrf v1
r4 tping 100 60 2.2.2.3 vrf v1
r4 tping 100 60 4321::3 vrf v1
  1. Install ContainerLab as described here
  2. Fetch serv-bmp02 file
  3. Launch ContainerLab serv-bmp02.yml topology: 

   containerlab deploy --topo serv-bmp02.yml
4. Destroy ContainerLab serv-bmp02.yml topology: 

   containerlab destroy --topo serv-bmp02.yml
5. Copy-paste configuration for each node in the lab topology

  1. Fetch or compile freeRtr rtr.jar file.
    You can grab it here
  2. Fetch serv-bmp02.tst file here
  3. Launch serv-bmp02.tst test: 

   java -jar ../../rtr.jar test tester serv-bmp02 path ./ temp ./ wait
4. Destroy freeRtr serv-bmp02.tst test: 

   Ctrl-C (In freeRtr test window)