Skip to content

Example: interop9: point2point rift

Alt text


hostname r1
vrf def v1
 rd 1:1
router rift4 1
 vrf v1
 router 41
 red conn
router rift6 1
 vrf v1
 router 61
 red conn
int eth1
 vrf for v1
 ipv4 addr
 ipv6 addr fe80::1 ffff::
 router rift4 1 ena
 router rift6 1 ena
int lo0
 vrf for v1
 ipv4 addr
 ipv6 addr 4321::1 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff


hostname r2
set interfaces ge-0/0/0.0 family inet address
set interfaces ge-0/0/0.0 family inet6
set interfaces lo0.0 family inet address
set interfaces lo0.0 family inet6 address 4321::2/128
set policy-options policy-statement ps1 from protocol direct
set policy-options policy-statement ps1 then accept
set protocols rift node-id 12345678
set protocols rift level top-of-fabric
set protocols rift export northbound ps1
set protocols rift interface ge-0/0/0.0
r1 tping 100 10 vrf v1
r1 tping 100 60 vrf v1 sou lo0
r1 tping 100 60 4321::2 vrf v1 sou lo0
  1. Install ContainerLab as described here
  2. Fetch intop9-rift01 file
  3. Launch ContainerLab intop9-rift01.yml topology:

   containerlab deploy --topo intop9-rift01.yml  
4. Destroy ContainerLab intop9-rift01.yml topology:

   containerlab destroy --topo intop9-rift01.yml  
5. Copy-paste configuration for each node in the lab topology

  1. Fetch or compile freeRtr rtr.jar file.
    You can grab it here
  2. Fetch intop9-rift01.tst file here
  3. Launch intop9-rift01.tst test:

   java -jar ../../rtr.jar test tester intop9-rift01 path ./ temp ./ wait
4. Destroy freeRtr intop9-rift01.tst test:

   Ctrl-C (In freeRtr test window)