Skip to content

Example: interop8: bgp community

Alt text

r1

hostname r1
vrf def v1
 rd 1:1
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.1 255.255.255.0
 ipv6 addr 1234::1 ffff::
 exit
int lo0
 vrf for v1
 ipv4 addr 2.2.2.1 255.255.255.255
 ipv6 addr 4321::1 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
route-map rm1
 sequence 10 act deny
  match stdcomm 1234:4321
 sequence 20 act permit
 exit
router bgp4 1
 vrf v1
 address uni
 local-as 1
 router-id 4.4.4.1
 neigh 1.1.1.2 remote-as 1
 neigh 1.1.1.2 route-map-in rm1
 red conn
 exit
router bgp6 1
 vrf v1
 address uni
 local-as 1
 router-id 6.6.6.1
 neigh 1234::2 remote-as 1
 neigh 1234::2 route-map-in rm1
 red conn
 exit

r2

hostname r2
ip forwarding
ipv6 forwarding
interface lo
 ip addr 2.2.2.2/32
 ip addr 2.2.2.3/32
 ip addr 2.2.2.4/32
 ipv6 addr 4321::2/128
 ipv6 addr 4321::3/128
 ipv6 addr 4321::4/128
 exit
interface ens3
 ip address 1.1.1.2/24
 ipv6 address 1234::2/64
 no shutdown
 exit
ip prefix-list pl1 seq 5 permit 2.2.2.3/32
route-map rm1 permit 10
 match ip address prefix-list pl1
 set community 1234:4321
route-map rm1 permit 20
 set community 1234:1234
ipv6 prefix-list pl2 seq 5 permit 4321::3/128
route-map rm2 permit 10
 match ipv6 address prefix-list pl2
 set community 1234:4321
route-map rm2 permit 20
 set community 1234:1234
router bgp 1
 neighbor 1.1.1.1 remote-as 1
 neighbor 1234::1 remote-as 1
 address-family ipv4 unicast
  neighbor 1.1.1.1 activate
  no neighbor 1234::1 activate
  redistribute connected route-map rm1
 address-family ipv6 unicast
  no neighbor 1.1.1.1 activate
  neighbor 1234::1 activate
  redistribute connected route-map rm2
 exit

r1 tping 100 10 1.1.1.2 vrf v1
r1 tping 100 10 1234::2 vrf v1
r1 tping 100 60 2.2.2.2 vrf v1 sou lo0
r1 tping 100 60 4321::2 vrf v1 sou lo0
r1 tping 0 60 2.2.2.3 vrf v1 sou lo0
r1 tping 0 60 4321::3 vrf v1 sou lo0
r1 tping 100 60 2.2.2.4 vrf v1 sou lo0
r1 tping 100 60 4321::4 vrf v1 sou lo0
  1. Install ContainerLab as described here
  2. Fetch intop8-bgp06 file
  3. Launch ContainerLab intop8-bgp06.yml topology: 

   containerlab deploy --topo intop8-bgp06.yml
4. Destroy ContainerLab intop8-bgp06.yml topology: 

   containerlab destroy --topo intop8-bgp06.yml
5. Copy-paste configuration for each node in the lab topology

  1. Fetch or compile freeRtr rtr.jar file.
    You can grab it here
  2. Fetch intop8-bgp06.tst file here
  3. Launch intop8-bgp06.tst test: 

   java -jar ../../rtr.jar test tester intop8-bgp06 path ./ temp ./ wait
4. Destroy freeRtr intop8-bgp06.tst test: 

   Ctrl-C (In freeRtr test window)