Example: framerelay with tdmoudp

TopologyConfigurationsVerificationEmulation

r1

hostname r1
vrf def v1
 rd 1:1
 exit
proxy-profile p1
 vrf v1
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.1 255.255.255.0
 ipv6 addr 1234::1 ffff::
 exit
int di1
 enc framerelay
 framerelay mode dce
 framerelay lmi ansi
 framerelay dlci 123
 vrf for v1
 ipv4 addr 2.2.2.1 255.255.255.0
 ipv6 addr 4321::1 ffff::
 exit
vpdn pou
 interface dialer1
 proxy p1
 target 1.1.1.2
 vcid 1234
 mtu 7
 protocol tdmoudp
 exit

r2

hostname r2
vrf def v1
 rd 1:1
 exit
proxy-profile p1
 vrf v1
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.2 255.255.255.0
 ipv6 addr 1234::2 ffff::
 exit
int di1
 enc framerelay
 framerelay lmi ansi
 framerelay dlci 123
 vrf for v1
 ipv4 addr 2.2.2.2 255.255.255.0
 ipv6 addr 4321::2 ffff::
 exit
vpdn pou
 interface dialer1
 proxy p1
 target 1.1.1.1
 vcid 1234
 mtu 7
 protocol tdmoudp
 exit

r1 tping 100 10 1.1.1.2 vrf v1
r2 tping 100 10 1.1.1.1 vrf v1
r1 tping 100 30 2.2.2.2 vrf v1
r1 tping 100 30 4321::2 vrf v1
r2 tping 100 30 2.2.2.1 vrf v1
r2 tping 100 30 4321::1 vrf v1

ContainerLabfreeRtr CLI

1. Install ContainerLab as described here
2. Fetch conn-tdmou05 file
3. Launch ContainerLab conn-tdmou05.yml topology:

   containerlab deploy --topo conn-tdmou05.yml  

4. Destroy ContainerLab conn-tdmou05.yml topology:

   containerlab destroy --topo conn-tdmou05.yml  

5. Copy-paste configuration for each node in the lab topology

1. Fetch or compile freeRtr rtr.jar file.
   You can grab it here
2. Fetch conn-tdmou05.tst file here
3. Launch conn-tdmou05.tst test:

   java -jar ../../rtr.jar test tester conn-tdmou05 path ./ temp ./ wait

4. Destroy freeRtr conn-tdmou05.tst test:

   Ctrl-C (In freeRtr test window)