Skip to content

Example: qos priority otherflowspec

Alt text

r1

hostname r1
vrf def v1
 rd 1:1
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.1 255.255.255.0
 ipv6 addr 1234::1 ffff::
 exit

r2

hostname r2
access-list a4
 permit 1 any all any all
 exit
access-list a6
 permit 58 any all any all
 exit
policy-map p4
 seq 10 act pri
  access-rate 163840
  match access-group a4
 exit
policy-map p6
 seq 10 act pri
  access-rate 163840
  match access-group a6
 exit
vrf def v1
 rd 1:1
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.2 255.255.255.0
 ipv6 addr 1234::2 ffff::
 exit
router bgp4 1
 vrf v1
 afi-other ena
 no afi-other vpn
 afi-other flowspec-install
 afi-other flowspec-advert p6
 exit
router bgp6 1
 vrf v1
 afi-other ena
 no afi-other vpn
 afi-other flowspec-install
 afi-other flowspec-advert p4
 exit

r2 tping 100 5 1.1.1.1 vrf v1
r2 tping 100 5 1234::1 vrf v1
r2 tping 85-95 5 1.1.1.1 vrf v1 rep 100 tim 500 siz 100
r2 tping 85-95 5 1234::1 vrf v1 rep 100 tim 500 siz 100
r1 tping 85-95 5 1.1.1.2 vrf v1 rep 100 tim 500 siz 100
r1 tping 85-95 5 1234::2 vrf v1 rep 100 tim 500 siz 100
  1. Install ContainerLab as described here
  2. Fetch qos-copp18 file
  3. Launch ContainerLab qos-copp18.yml topology: 

   containerlab deploy --topo qos-copp18.yml
4. Destroy ContainerLab qos-copp18.yml topology: 

   containerlab destroy --topo qos-copp18.yml
5. Copy-paste configuration for each node in the lab topology

  1. Fetch or compile freeRtr rtr.jar file.
    You can grab it here
  2. Fetch qos-copp18.tst file here
  3. Launch qos-copp18.tst test: 

   java -jar ../../rtr.jar test tester qos-copp18 path ./ temp ./ wait
4. Destroy freeRtr qos-copp18.tst test: 

   Ctrl-C (In freeRtr test window)