Example: interop8: verify source

TopologyConfigurationsVerificationEmulation

r1

hostname r1
vrf def v1
 rd 1:1
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.1 255.255.255.0
 ipv6 addr 1234::1 ffff::
 ipv4 verify rx
 ipv6 verify rx
 exit

r2

hostname r2
ip forwarding
ipv6 forwarding
interface ens3
 ip address 1.1.1.2/24
 ipv6 address 1234::2/64
 no shutdown
 exit

r1 tping 100 15 1.1.1.2 vrf v1
r1 tping 100 15 1234::2 vrf v1

ContainerLabfreeRtr CLI

1. Install ContainerLab as described here
2. Fetch intop8-eth02 file
3. Launch ContainerLab intop8-eth02.yml topology:

   containerlab deploy --topo intop8-eth02.yml  

4. Destroy ContainerLab intop8-eth02.yml topology:

   containerlab destroy --topo intop8-eth02.yml  

5. Copy-paste configuration for each node in the lab topology

1. Fetch or compile freeRtr rtr.jar file.
   You can grab it here
2. Fetch intop8-eth02.tst file here
3. Launch intop8-eth02.tst test:

   java -jar ../../rtr.jar test tester intop8-eth02 path ./ temp ./ wait

4. Destroy freeRtr intop8-eth02.tst test:

   Ctrl-C (In freeRtr test window)