Skip to content

Example: interop2: ldp over point2point ethernet

Alt text

r1

hostname r1
vrf def v1
 rd 1:1
 label-mode per-prefix
 exit
access-list test4
 deny 1 any all any all
 permit all any all any all
 exit
access-list test6
 deny all 4321:: ffff:: all 4321:: ffff:: all
 permit all any all any all
 exit
int lo0
 vrf for v1
 ipv4 addr 2.2.2.1 255.255.255.255
 ipv6 addr 4321::1 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
int lo1
 vrf for v1
 ipv4 addr 2.2.2.11 255.255.255.255
 ipv6 addr 1111::1111:1111 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.2 255.255.255.254
 ipv6 addr fe80::3 ffff:ffff:ffff:ffff:ffff:ffff:ffff:fffe
 ipv4 access-group-in test4
 ipv6 access-group-in test6
! ipv4 access-group-out test4
! ipv6 access-group-out test6
 mpls enable
 mpls ldp4
 mpls ldp6 lo1
 exit
ipv4 route v1 2.2.2.2 255.255.255.255 1.1.1.3
ipv6 route v1 4321::2 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff fe80::2
ipv4 route v1 2.2.2.3 255.255.255.255 1.1.1.3
ipv6 route v1 4321::3 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff fe80::2
int pweth1
 vrf for v1
 ipv4 addr 3.3.3.1 255.255.255.252
 pseudo v1 lo0 pweompls 2.2.2.3 1234
 exit
int pweth2
 vrf for v1
 ipv4 addr 3.3.3.5 255.255.255.252
 pseudo v1 lo0 pweompls 4321::3 1234
 exit

r2

hostname r2
interface loopback0
 ipv4 addr 2.2.2.2 255.255.255.255
 ipv6 addr 4321::2/128
 exit
interface gigabit0/0/0/0
 ipv4 address 1.1.1.3 255.255.255.254
 ipv6 address fe80::2 link-local
 ipv6 enable
 no shutdown
 exit
interface gigabit0/0/0/1
 ipv4 address 1.1.2.2 255.255.255.254
 ipv6 address fe80::2 link-local
 ipv6 enable
 no shutdown
 exit
mpls ldp
 address-family ipv4
 address-family ipv6
 interface gigabit0/0/0/0
  address-family ipv4
  address-family ipv6
 interface gigabit0/0/0/1
  address-family ipv4
  address-family ipv6
router static
 address-family ipv4 unicast 2.2.2.1/32 1.1.1.2 gigabit0/0/0/0
 address-family ipv6 unicast 4321::1/128 fe80::3 gigabit0/0/0/0
 address-family ipv6 unicast 1111::1111:1111/128 fe80::3 gigabit0/0/0/0
 address-family ipv4 unicast 2.2.2.3/32 1.1.2.3 gigabit0/0/0/1
 address-family ipv6 unicast 4321::3/128 fe80::3 gigabit0/0/0/1
 address-family ipv6 unicast 1111::3333:3333/128 fe80::3 gigabit0/0/0/1
 exit

r3

hostname r3
vrf def v1
 rd 1:1
 label-mode per-prefix
 exit
access-list test4
 deny 1 any all any all
 permit all any all any all
 exit
access-list test6
 deny all 4321:: ffff:: all 4321:: ffff:: all
 permit all any all any all
 exit
int lo0
 vrf for v1
 ipv4 addr 2.2.2.3 255.255.255.255
 ipv6 addr 4321::3 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
int lo1
 vrf for v1
 ipv4 addr 2.2.2.13 255.255.255.255
 ipv6 addr 1111::3333:3333 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.2.3 255.255.255.254
 ipv6 addr fe80::3 ffff:ffff:ffff:ffff:ffff:ffff:ffff:fffe
 ipv4 access-group-in test4
 ipv6 access-group-in test6
! ipv4 access-group-out test4
! ipv6 access-group-out test6
 mpls enable
 mpls ldp4
 mpls ldp6 lo1
 exit
ipv4 route v1 2.2.2.1 255.255.255.255 1.1.2.2
ipv6 route v1 4321::1 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff fe80::2
ipv4 route v1 2.2.2.2 255.255.255.255 1.1.2.2
ipv6 route v1 4321::2 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff fe80::2
int pweth1
 vrf for v1
 ipv4 addr 3.3.3.2 255.255.255.252
 pseudo v1 lo0 pweompls 2.2.2.1 1234
 exit
int pweth2
 vrf for v1
 ipv4 addr 3.3.3.6 255.255.255.252
 pseudo v1 lo0 pweompls 4321::1 1234
 exit

r1 tping 100 60 2.2.2.2 vrf v1 sou lo0
r1 tping 0 10 1.1.1.3 vrf v1
r1 tping 100 60 4321::2 vrf v1 sou lo0
!r1 tping 0 10 4321::2 vrf v1
r3 tping 100 60 2.2.2.2 vrf v1 sou lo0
r3 tping 0 10 1.1.2.2 vrf v1
r3 tping 100 60 4321::2 vrf v1 sou lo0
!r3 tping 0 10 4321::2 vrf v1
r1 tping 100 40 3.3.3.2 vrf v1
r3 tping 100 40 3.3.3.1 vrf v1
r1 tping 100 40 3.3.3.6 vrf v1
r3 tping 100 40 3.3.3.5 vrf v1
  1. Install ContainerLab as described here
  2. Fetch intop2-ldp06 file
  3. Launch ContainerLab intop2-ldp06.yml topology: 

   containerlab deploy --topo intop2-ldp06.yml
4. Destroy ContainerLab intop2-ldp06.yml topology: 

   containerlab destroy --topo intop2-ldp06.yml
5. Copy-paste configuration for each node in the lab topology

  1. Fetch or compile freeRtr rtr.jar file.
    You can grab it here
  2. Fetch intop2-ldp06.tst file here
  3. Launch intop2-ldp06.tst test: 

   java -jar ../../rtr.jar test tester intop2-ldp06 path ./ temp ./ wait
4. Destroy freeRtr intop2-ldp06.tst test: 

   Ctrl-C (In freeRtr test window)