Example: interop1: rip

TopologyConfigurationsVerificationEmulation

r1

hostname r1
vrf def v1
 rd 1:1
 exit
router rip4 1
 vrf v1
 red conn
 exit
router rip6 1
 vrf v1
 red conn
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.1 255.255.255.0
 ipv6 addr fe80::1 ffff::
 router rip4 1 ena
 router rip6 1 ena
 exit
int lo0
 vrf for v1
 ipv4 addr 2.2.2.1 255.255.255.255
 ipv6 addr 4321::1 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit

r2

hostname r2
ip routing
ipv6 unicast-routing
interface loopback0
 ip addr 2.2.2.2 255.255.255.255
 ipv6 addr 4321::2/128
 exit
router rip
 version 2
 redistribute connected
 no auto-summary
 network 1.0.0.0
 exit
ipv6 router rip 1
 redistribute connected
 exit
interface gigabit1
 ip address 1.1.1.2 255.255.255.0
 ipv6 enable
 ipv6 rip 1 enable
 no shutdown
 exit

r1 tping 100 10 1.1.1.2 vrf v1
r1 tping 100 120 2.2.2.2 vrf v1 sou lo0
r1 tping 100 120 4321::2 vrf v1 sou lo0

ContainerLabfreeRtr CLI

1. Install ContainerLab as described here
2. Fetch intop1-rip01 file
3. Launch ContainerLab intop1-rip01.yml topology:

   containerlab deploy --topo intop1-rip01.yml  

4. Destroy ContainerLab intop1-rip01.yml topology:

   containerlab destroy --topo intop1-rip01.yml  

5. Copy-paste configuration for each node in the lab topology

1. Fetch or compile freeRtr rtr.jar file.
   You can grab it here
2. Fetch intop1-rip01.tst file here
3. Launch intop1-rip01.tst test:

   java -jar ../../rtr.jar test tester intop1-rip01 path ./ temp ./ wait

4. Destroy freeRtr intop1-rip01.tst test:

   Ctrl-C (In freeRtr test window)