Example: interop1: ethernet over mpls cw

TopologyConfigurationsVerificationEmulation

r1

hostname r1
vrf def v1
 rd 1:1
 label-mode per-prefix
 exit
int lo0
 vrf for v1
 ipv4 addr 2.2.2.1 255.255.255.255
 ipv6 addr 4321::1 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
proxy-profile p1
 vrf v1
 source lo0
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.1 255.255.255.0
 ipv6 addr 1234::1 ffff::
 mpls enable
 mpls ldp4
 mpls ldp6
 exit
ipv4 route v1 2.2.2.2 255.255.255.255 1.1.1.2
ipv6 route v1 4321::2 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 1234::2
bridge 1
 mac-learn
 exit
int bvi1
 vrf for v1
 ipv4 addr 3.3.3.1 255.255.255.0
 ipv6 addr 3333::1 ffff::
 exit
vpdn eompls
 bridge-gr 1
 proxy p1
 target 2.2.2.2
 mtu 1500
 vcid 1234
 pwtype eth
 control
 protocol pweompls
 exit

r2

hostname r2
ip routing
ipv6 unicast-routing
mpls ldp explicit-null
interface loopback0
 ip addr 2.2.2.2 255.255.255.255
 ipv6 addr 4321::2/128
 exit
interface gigabit1
 ip address 1.1.1.2 255.255.255.0
 ipv6 address 1234::2/64
 mpls ip
 no shutdown
 exit
interface gigabit2
 xconnect 2.2.2.1 1234 encapsulation mpls
 no shutdown
 exit
ip route 2.2.2.1 255.255.255.255 1.1.1.1
ipv6 route 4321::1/128 1234::1

r3

hostname r3
vrf def v1
 rd 1:1
 exit
int eth1
 vrf for v1
 ipv4 addr 3.3.3.2 255.255.255.0
 ipv6 addr 3333::2 ffff::
 exit

r1 tping 100 60 3.3.3.2 vrf v1
r1 tping 100 60 3333::2 vrf v1
r3 tping 100 60 3.3.3.1 vrf v1
r3 tping 100 60 3333::1 vrf v1

ContainerLabfreeRtr CLI

1. Install ContainerLab as described here
2. Fetch intop1-ldp07 file
3. Launch ContainerLab intop1-ldp07.yml topology:

   containerlab deploy --topo intop1-ldp07.yml  

4. Destroy ContainerLab intop1-ldp07.yml topology:

   containerlab destroy --topo intop1-ldp07.yml  

5. Copy-paste configuration for each node in the lab topology

1. Fetch or compile freeRtr rtr.jar file.
   You can grab it here
2. Fetch intop1-ldp07.tst file here
3. Launch intop1-ldp07.tst test:

   java -jar ../../rtr.jar test tester intop1-ldp07 path ./ temp ./ wait

4. Destroy freeRtr intop1-ldp07.tst test:

   Ctrl-C (In freeRtr test window)