Skip to content

Example: interop1: ldp php lsp

Alt text

r1

hostname r1
vrf def v1
 rd 1:1
 label-mode per-prefix
 exit
access-list test4
 deny 1 any all any all
 permit all any all any all
 exit
access-list test6
 deny all 4321:: ffff:: all 4321:: ffff:: all
 permit all any all any all
 exit
int lo0
 vrf for v1
 ipv4 addr 2.2.2.1 255.255.255.255
 ipv6 addr 4321::1 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.1 255.255.255.0
 ipv6 addr 1234:1::1 ffff::
 ipv4 access-group-in test4
 ipv6 access-group-in test6
! ipv4 access-group-out test4
 ipv6 access-group-out test6
 mpls enable
 mpls ldp4
 mpls label4pop
 mpls ldp6
 mpls label6pop
 exit
ipv4 route v1 2.2.2.2 255.255.255.255 1.1.1.2
ipv6 route v1 4321::2 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 1234:1::2
ipv4 route v1 2.2.2.3 255.255.255.255 1.1.1.2
ipv6 route v1 4321::3 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 1234:1::2
int pweth1
 vrf for v1
 ipv4 addr 3.3.3.1 255.255.255.252
 pseudo v1 lo0 pweompls 2.2.2.3 1234
 exit

r2

hostname r2
ip routing
ipv6 unicast-routing
interface loopback0
 ip addr 2.2.2.2 255.255.255.255
 ipv6 addr 4321::2/128
 exit
interface gigabit1
 ip address 1.1.1.2 255.255.255.0
 ipv6 address 1234:1::2/64
 mpls ip
 no shutdown
 exit
interface gigabit2
 ip address 1.1.2.2 255.255.255.0
 ipv6 address 1234:2::2/64
 mpls ip
 no shutdown
 exit
ip route 2.2.2.1 255.255.255.255 1.1.1.1
ipv6 route 4321::1/128 1234:1::1
ip route 2.2.2.3 255.255.255.255 1.1.2.1
ipv6 route 4321::3/128 1234:2::1

r3

hostname r3
vrf def v1
 rd 1:1
 label-mode per-prefix
 exit
access-list test4
 deny 1 any all any all
 permit all any all any all
 exit
access-list test6
 deny all 4321:: ffff:: all 4321:: ffff:: all
 permit all any all any all
 exit
int lo0
 vrf for v1
 ipv4 addr 2.2.2.3 255.255.255.255
 ipv6 addr 4321::3 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.2.1 255.255.255.0
 ipv6 addr 1234:2::1 ffff::
 ipv4 access-group-in test4
 ipv6 access-group-in test6
! ipv4 access-group-out test4
 ipv6 access-group-out test6
 mpls enable
 mpls ldp4
 mpls label4pop
 mpls ldp6
 mpls label6pop
 exit
ipv4 route v1 2.2.2.1 255.255.255.255 1.1.2.2
ipv6 route v1 4321::1 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 1234:2::2
ipv4 route v1 2.2.2.2 255.255.255.255 1.1.2.2
ipv6 route v1 4321::2 ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 1234:2::2
int pweth1
 vrf for v1
 ipv4 addr 3.3.3.2 255.255.255.252
 pseudo v1 lo0 pweompls 2.2.2.1 1234
 exit

r1 tping 0 60 2.2.2.2 vrf v1 sou lo0
r1 tping 0 10 1.1.1.2 vrf v1
r3 tping 0 60 2.2.2.2 vrf v1 sou lo0
r3 tping 0 10 1.1.2.2 vrf v1
r1 tping 100 40 3.3.3.2 vrf v1
r3 tping 100 40 3.3.3.1 vrf v1
  1. Install ContainerLab as described here
  2. Fetch intop1-ldp05 file
  3. Launch ContainerLab intop1-ldp05.yml topology: 

   containerlab deploy --topo intop1-ldp05.yml
4. Destroy ContainerLab intop1-ldp05.yml topology: 

   containerlab destroy --topo intop1-ldp05.yml
5. Copy-paste configuration for each node in the lab topology

  1. Fetch or compile freeRtr rtr.jar file.
    You can grab it here
  2. Fetch intop1-ldp05.tst file here
  3. Launch intop1-ldp05.tst test: 

   java -jar ../../rtr.jar test tester intop1-ldp05 path ./ temp ./ wait
4. Destroy freeRtr intop1-ldp05.tst test: 

   Ctrl-C (In freeRtr test window)