Skip to content

Example: interop1: ike1 with aes192cbc

Alt text

r1

hostname r1
vrf def v1
 rd 1:1
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.1 255.255.255.0
 ipv6 addr 1234::1 ffff::
 exit
crypto ipsec ips
 group 01
 cipher aes192cbc
 hash md5
 seconds 3600
 bytes 67108864
 key tester
 role init
 isakmp 1
 protected ipv4
 exit
int tun1
 tunnel vrf v1
 tunnel prot ips
 tunnel mode ipsec
 tunnel source ethernet1
 tunnel destination 1.1.1.2
 vrf for v1
 ipv4 addr 2.2.2.1 255.255.255.0
 ipv6 addr 4321::1 ffff::
 exit

r2

hostname r2
ip routing
ipv6 unicast-routing
interface gigabit1
 ip address 1.1.1.2 255.255.255.0
 ipv6 address 1234::2/64
 no shutdown
 exit
crypto isakmp policy 10
 encryption aes 192
 hash md5
 authentication pre-share
 group 1
 lifetime 3600
 exit
crypto isakmp key tester address 1.1.1.1
crypto ipsec transform-set ts1 esp-aes 192 esp-md5-hmac
 mode tunnel
 exit
crypto ipsec profile pr1
 set security-association lifetime seconds 3600
 set security-association lifetime kilobytes 65536
 set transform-set ts1
 exit
interface tunnel1
 ip address 2.2.2.2 255.255.255.0
 tunnel source gigabit1
 tunnel destination 1.1.1.1
 tunnel mode ipsec ipv4
 tunnel protection ipsec profile pr1
 exit

r1 tping 100 10 1.1.1.2 vrf v1
r1 tping 100 120 2.2.2.2 vrf v1
  1. Install ContainerLab as described here
  2. Fetch intop1-ike105 file
  3. Launch ContainerLab intop1-ike105.yml topology: 

   containerlab deploy --topo intop1-ike105.yml
4. Destroy ContainerLab intop1-ike105.yml topology: 

   containerlab destroy --topo intop1-ike105.yml
5. Copy-paste configuration for each node in the lab topology

  1. Fetch or compile freeRtr rtr.jar file.
    You can grab it here
  2. Fetch intop1-ike105.tst file here
  3. Launch intop1-ike105.tst test: 

   java -jar ../../rtr.jar test tester intop1-ike105 path ./ temp ./ wait
4. Destroy freeRtr intop1-ike105.tst test: 

   Ctrl-C (In freeRtr test window)