Example: swipe over loopback

TopologyConfigurationsVerificationEmulation

r1

hostname r1
vrf def v1
 rd 1:1
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.1 255.255.255.252
 exit
int lo0
 vrf for v1
 ipv4 addr 1.1.1.101 255.255.255.255
 exit
ipv4 route v1 1.1.1.102 255.255.255.255 1.1.1.2
crypto ipsec ips
 cipher des
 hash md5
 key tester
 exit
int tun1
 tunnel vrf v1
 tunnel prot ips
 tunnel mode swipe
 tunnel source lo0
 tunnel destination 1.1.1.102
 vrf for v1
 ipv4 addr 2.2.2.1 255.255.255.0
 ipv6 addr 4321::1 ffff::
 exit

r2

hostname r2
vrf def v1
 rd 1:1
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.2 255.255.255.252
 exit
int lo0
 vrf for v1
 ipv4 addr 1.1.1.102 255.255.255.255
 exit
ipv4 route v1 1.1.1.101 255.255.255.255 1.1.1.1
crypto ipsec ips
 cipher des
 hash md5
 key tester
 exit
int tun1
 tunnel vrf v1
 tunnel prot ips
 tunnel mode swipe
 tunnel source lo0
 tunnel destination 1.1.1.101
 vrf for v1
 ipv4 addr 2.2.2.2 255.255.255.0
 ipv6 addr 4321::2 ffff::
 exit

r1 tping 100 5 2.2.2.2 vrf v1
r2 tping 100 5 2.2.2.1 vrf v1
r1 tping 100 5 4321::2 vrf v1
r2 tping 100 5 4321::1 vrf v1

ContainerLabfreeRtr CLI

1. Install ContainerLab as described here
2. Fetch crypt-swipe04 file
3. Launch ContainerLab crypt-swipe04.yml topology:

   containerlab deploy --topo crypt-swipe04.yml  

4. Destroy ContainerLab crypt-swipe04.yml topology:

   containerlab destroy --topo crypt-swipe04.yml  

5. Copy-paste configuration for each node in the lab topology

1. Fetch or compile freeRtr rtr.jar file.
   You can grab it here
2. Fetch crypt-swipe04.tst file here
3. Launch crypt-swipe04.tst test:

   java -jar ../../rtr.jar test tester crypt-swipe04 path ./ temp ./ wait

4. Destroy freeRtr crypt-swipe04.tst test:

   Ctrl-C (In freeRtr test window)