Skip to content

Example: ipv6 in ike2 over ipv4

Alt text

r1

hostname r1
vrf def v1
 rd 1:1
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.1 255.255.255.0
 ipv6 addr 1234::1 ffff::
 exit
crypto ipsec ips
 group 02
 cipher des
 hash md5
 seconds 3600
 bytes 1024000
 key tester
 role init
 isakmp 2
 protected ipv6
 exit
int tun1
 tunnel vrf v1
 tunnel prot ips
 tunnel mode ipsec
 tunnel source ethernet1
 tunnel destination 1.1.1.2
 vrf for v1
 ipv4 addr 2.2.2.1 255.255.255.0
 ipv6 addr 4321::1 ffff::
 exit

r2

hostname r2
vrf def v1
 rd 1:1
 exit
crypto ipsec ips
 group 02
 cipher des
 hash md5
 seconds 3600
 bytes 1024000
 key tester
 role resp
 isakmp 2
 protected ipv6
 exit
int eth1
 vrf for v1
 ipv4 addr 1.1.1.2 255.255.255.0
 ipv6 addr 1234::2 ffff::
 exit
int tun1
 tunnel vrf v1
 tunnel prot ips
 tunnel mode ipsec
 tunnel source ethernet1
 tunnel destination 1.1.1.1
 vrf for v1
 ipv4 addr 2.2.2.2 255.255.255.0
 ipv6 addr 4321::2 ffff::
 exit

r1 tping 0 10 2.2.2.2 vrf v1
r2 tping 0 10 2.2.2.1 vrf v1
r1 tping 100 10 4321::2 vrf v1
r2 tping 100 10 4321::1 vrf v1
  1. Install ContainerLab as described here
  2. Fetch crypt-ike203 file
  3. Launch ContainerLab crypt-ike203.yml topology: 

   containerlab deploy --topo crypt-ike203.yml
4. Destroy ContainerLab crypt-ike203.yml topology: 

   containerlab destroy --topo crypt-ike203.yml
5. Copy-paste configuration for each node in the lab topology

  1. Fetch or compile freeRtr rtr.jar file.
    You can grab it here
  2. Fetch crypt-ike203.tst file here
  3. Launch crypt-ike203.tst test: 

   java -jar ../../rtr.jar test tester crypt-ike203 path ./ temp ./ wait
4. Destroy freeRtr crypt-ike203.tst test: 

   Ctrl-C (In freeRtr test window)